Frizzlife PD600 Reverse Osmosis Under Sink Water Filter System

Frizzlife PD600 Reverse Osmosis Under Sink Water Filter System

$359.99

  • Superior Removing Performance: Uses high-grade reverse osmosis membrane with 0.0001 micron filtration accuracy. Remove 99.99% of 1000+ harmful contaminants, including lead, chlorine, fluoride, heavy metals, chloramine, chemicals, TDS, limescale, arsenic and asbestos and more. Sediment filter is 2-in-1 composite filter that functions as two filters combined. Your drinking water experiences 3 stages of filtration before going to your cup.
  • 1.5:1 Pure to Drain Ratio: Thanks to advanced water-saving technology, PD600 RO system maximizes the efficiency and can save your water up to 450% compared with conventional RO filter systems! Being both economic and environmental friendly, it makes your water bills more affordable without plastic waste.
  • No Tank Design: PD600 is specially designed as a integrated unit without tank. The compact and sleek filter system with a small and convenient footprint takes up less space, fitting perfectly for most cabinets under kitchen sink. No more concern on secondary pollution that led by tank for your drinking water.
  • Fast Water Flow:  Adopts internal pump and is able to produce 600 gallons of pure water per day, sufficiently serving the daily water needs of a large family or small company. The water flow is fast and stable, filling a 330ml cup of water in about 8 seconds.
  • Smart LED Display: The smart display panel clearly tells Real-Time OUT TDS after filtration and remaining lifespan of each filter. The built-in TDS checker constantly monitors the quality of your drinking water 24/7. Acting as a intelligent reminder, the color-coded indicator will always keep you updated about filter usage and remind you to change filters in advance.
  • Quick Change:  The filter cartridges adopt twist-in design and can be replaced directly by ONE SINGLE TURN.
  • Brand: Frizzlife
  • Availability: In Stock
  • SKU: PD600

Super Low Drain Ratio

Th system maximizes the efficiency and can save your water up to 450% compared with conventional RO filter systems on market.

It makes your water bills more affordable. Over the life of the system, the system pays for itself in water savings!

      • Advanced water-saving technology

Fast Water Flow

The internal pump ensures rapid and stable water flow. It only takes about 10 seconds to fill a 330ml cup of fresh RO water. Satisfy your thirst in a snap.

High capacity can serve daily water needs of large family and small companies.

  • 600 GPD
  • 0.41 GPM

You Know Your Water

The smart display panel clearly tells real-time out TDS and filter remaining lifespan.

The built-in TDS system constantly monitors the quality of your drinking water 24/7.

The color-coded indicators will always remind you to change filters in advance.

✔Real-time out TDS


✔Filter life monitoring 

Tankless Design

Designed as an integrated unit without bulky pressure tank. It also eliminates secondary pollution due to unventilated tank for your drinking water.

✔More storage space

✔Avoid secondary pollution

Quick Replacement 

Filter cartridges can be replaced only with ONE SINGLE TURN after shutting off the power supply.


✔Step-to-step instructional manual


✔Well-organized video

Q: Why there are many white bubbles in the water?

A: Normally for the first time use of the RO system, the water seems to have white bubbles in it,

which is normal and totally drinkable. It is because when the pump is pressurizing the water, it

will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility

further increases. The air can’t be released at that time because of the pressure in the RO system.

However, when you turn on the tap to get a cup of water, the pressure of air is released. So you

will see a huge number of bubbles in the water. It looks cloudy and white, but they are just

bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally

good for drinking.

 

Q: Why TDS is higher at the beginning, but back to normal range after about one minute?

A: Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional

RO system or tankless RO system. When the RO system starts to work, pressure from the pump

overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes

the impurities. When the RO system stops working, the pump stops offering pressure as well. At 

that time, because of different concentrations, a small fraction of ions will enter into pure water

and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the

beginning, the quality water is still unbeatable by any other filtration methods including carbon,

KDF, ceramic, UF, UV, etc.. The water is totally good to drink and you don’t have to wait for about

1 minute to get the water, since the whole system will not release any harmful substances to the

water. The TDS removing rate for PD600 is about 94-95%, if your incoming TDS is high, the outlet

TDS will be high too.

 

Q: How does the TDS display on the machine work?

A: When the system is running, the TDS sensor in the PD600 will keep testing the water quality

every 1 minute. Therefore, the TDS result you see from the machine is from the last test memory.

If you want to have the real-time TDS result, please let the machine run for about 1 minute.

 

Q: My granite is thicker than 1.5 inch and the faucet stem is not long enough, what should I do?

A: Please feel free to contact us at support@frizzlife.com to claim for a longer thread stem.

 

 

 

 

 

Model No.PD600Filter Cartridge InsideASR211, ASR212
Product Dimensions14.7 x 5.3 x 15.5 inchesItem Weight33.06 lb
Working PressureMin.20psi Max.80psiFlow Rate0.41 GPM
Rated Voltage110-240 VACFrequency 50-60 Hz
Rated Power85 WOperating TemperatureMin.39ºF, Max 100ºF

Recently Viewed Products

$359.99