What Is Water Distillation?
- Evaporation: Heat is applied to a water source. The water evaporates, turning into steam (water vapor).
- Separation: Minerals, salts, heavy metals, and microorganisms are left behind in the original container.
- Condensation: The pure water vapor is cooled, causing it to change back into liquid water droplets.
- Collection: These pure water droplets are collected in a clean, separate container.
Benefits of Water Distillation
- Exceptional Purity: Distillation removes over 99% of dissolved solids, including minerals like calcium and magnesium, heavy metals like lead and mercury, and most biological contaminants like bacteria and viruses. This makes it a highly effective water purification method.
- Removes a Wide Range of Contaminants: Unlike many water filtration systems that are designed to target specific chemicals, distillation offers a broad-spectrum solution. Filters such as carbon filters, for instance, are effective at removing chlorine, odors, and certain volatile organic compounds (VOCs), but they may not remove heavy metals or biological pathogens. Distillation, on the other hand, works by boiling water to create steam, leaving virtually all contaminants behind, including the most challenging ones.

Limitations to Consider
- Certain Chemicals Can Remain: Some volatile organic compounds (VOCs) and chemicals that have a lower boiling point than water may evaporate with the steam and end up in the final product. Using a post-filter with activated carbon can help remove these.
- Energy Intensive: Boiling water requires a significant amount of energy, whether from your stovetop or an electric distiller. This can make it less cost-effective for large volumes compared to a water filter.
- Slower Process: Making distilled water at home is not a fast process. A typical DIY setup produces a limited amount of water per hour.
Instruction of making Distill Water at Home
Required Equipment and Safety Checklist
- A large, deep stainless steel pot with a lid (at least 5 quarts or larger).
- A lid that fits the pot well, preferably one that is dome-shaped or concave so it dips down in the middle when inverted.
- A smaller collection bowl made of glass or stainless steel that can fit inside the large pot. It should be shorter than the pot's sides and ideally be able to float.
- A bag or tray of ice cubes.
- A heat source (your stovetop).
- Oven mitts for safe handling.
- Use Food-Grade Materials: Ensure your pot and collection bowl are made of food-grade stainless steel or glass to prevent leaching unwanted chemicals into your pure water.
- Clean Everything Thoroughly: Wash the pot, lid, and collection bowl with soap and water before starting.
- Never Leave the Stove Unattended: This process involves continuous heat. Stay in the kitchen to monitor it.
- Handle with Care: The pot, lid, and steam will be extremely hot. Always use oven mitts.
Step-by-Step Instructions
Setup and Fill: Fill the large pot about halfway with tap water. You need enough water to create steam but not so much that it will boil over into your collection bowl. Place the smaller collection bowl inside the pot. It should float on the surface of the water. If it doesn't float, you can place a round baking rack on the bottom of the pot to elevate the bowl.
Heat and Simmer: Place the pot on your stove over medium heat. You want the water to come to a steady simmer, not a rolling boil. A temperature between 180–200°F (82–93°C) is ideal. A vigorous boil can cause water from the pot to splash into your clean collection bowl, defeating the purpose.
Condense with Ice: Once the water is simmering, place the lid on the pot upside down. The handle or knob of the lid should be pointing down, creating a cone shape that directs condensation to the center. Fill the top of the inverted lid with ice. The cold surface of the lid will cause the steam from the boiling water inside the pot to cool rapidly and condense into pure water droplets.
Collect and Store: As the steam condenses on the underside of the cold lid, it will drip down into your floating collection bowl. This collected liquid is your distilled water. The process can take an hour or more to produce a few cups of water.
- Replenish the ice on the lid as it melts.
- Once you have collected enough water, turn off the heat.
- Using oven mitts, carefully remove the hot lid. Then, carefully lift the collection bowl out of the pot.
- Let the distilled water cool completely before transferring it to a clean, airtight container for storage.
Estimated Output: Expect this DIY method to be slow. You might produce about one cup of distilled water per hour. Plan on a 15–20% water loss, as not all steam will be captured.
Troubleshooting & Pro Safety Tips
Problem: My collection bowl is tipping over.
Solution: Make sure the bowl is well-balanced or use a metal baking rack at the bottom of the pot to provide a stable surface. Don't let the collection bowl get too full, as it can become unstable.
Problem: The water tastes funny.
Solution: An off-taste can come from contaminants in the pot or from VOCs that have a low boiling point. Ensure all equipment is spotlessly clean. Running the distilled water through an activated carbon filter can remove taste and odor issues.
Problem: I see white residue in the big pot after I'm done.
Solution: This is perfectly normal! That residue consists of the minerals and solids that were removed from your tap water. It's proof the process worked. Simply wash the pot thoroughly after each use.
- Pro Tip: To increase efficiency, have a steady supply of ice ready. The colder the lid, the faster the steam will condense.

Using a Countertop Water Distiller
How They Work: An electric distiller operates on the same principle as the stovetop method. It has a boiling chamber for the source water, a heating element, a fan-cooled condensing coil, and a carafe to collect the pure water. You simply fill the chamber, press a button, and the machine does the rest.
- Fill: Open the distiller and fill the boiling chamber with tap water up to the marked line.
- Assemble: Place the top cover on, which contains the fan and condensing coils, and position the collection jug under the spout.
- Start: Plug it in and turn it on. The machine will automatically heat the water, condense the steam, and shut off when the cycle is complete.
- Clean: Regular cleaning is essential to remove the mineral scale that builds up in the boiling chamber. Most manufacturers recommend cleaning after every few cycles.
Cost vs. DIY: A Quick Comparison
| Feature | DIY Stovetop Method | Countertop Water Distiller |
| Initial Cost | Free (uses existing kitchenware) | $75 - $300+ |
| Speed | Very slow (approx. 1 cup/hour) | Faster (approx. 1 gallon in 4-6 hours) |
| Convenience | Low (requires constant monitoring) | High (set it and forget it) |
| Energy Use | High (stovetop energy) | Moderate to High (electric appliance) |
| Output Volume | Low (best for small amounts) | High (produces a gallon or more per cycle) |
| Best For | Emergencies, occasional small needs | Regular use for appliances, drinking |
- DIY Stovetop Method: This method is nearly free since it uses existing kitchenware such as a pot, bowl, and lid. It requires no special equipment, making it an economical choice for those who want to distill water without a significant upfront investment.
- Countertop Water Distiller: While there’s an initial investment, countertop water distillers typically range from $75 to $300 or more, depending on the brand and features. While the upfront cost may seem high compared to the stovetop method, these units are specifically designed for water distillation and offer greater convenience and efficiency.
- DIY Stovetop Method: This method is very slow, typically producing only about 1 cup of distilled water per hour. It’s best suited for small quantities or occasional use, making it less practical for anyone who needs a large amount of distilled water regularly.
- Countertop Water Distiller: This option is much faster, generally producing 1 gallon of distilled water in 4-6 hours. The distiller operates continuously and is far more efficient, making it ideal for those with regular or larger water distillation needs.
- DIY Stovetop Method: Although the initial cost is minimal, this method requires constant attention and monitoring. You need to ensure that the water doesn’t boil dry, adjust the heat, and check the water level regularly. It’s time-consuming and can be impractical for anyone looking for an easy, hands-off solution.
- Countertop Water Distiller: Once set up, a countertop distiller operates automatically. You simply fill the tank, start the machine, and wait for the cycle to finish. This makes it a much more convenient option for people who need to distill water regularly without the hassle of constant monitoring.
- DIY Stovetop Method: The DIY method tends to have high energy consumption, as it requires heating water on the stove for an extended period. This can lead to increased gas or electricity costs, especially if you’re distilling water frequently. The heating process can be less energy-efficient compared to an electric distiller.
- Countertop Water Distiller: A countertop distiller generally uses moderate energy. While it runs on electricity, it is designed specifically for distillation and is typically more energy-efficient than using a stovetop. However, the running time (usually 4-6 hours per cycle) still contributes to energy use, making it a slightly higher cost in terms of electricity compared to a stovetop.
- DIY Stovetop Method: The output volume is relatively low, making this method ideal for small batches. You can expect to produce a cup or less distilled water per hour, which is perfect for people who only need small quantities for occasional use, such as for an iron or small appliance.
- Countertop Water Distiller: This method offers a high output, capable of producing 1 gallon or more per cycle. For those who need larger quantities of distilled water for regular use, such as for drinking, cooking, or filling larger appliances, this method is far more efficient and practical.
Is Distilled Water Safe to Drink & Use?
Health Impacts: For most healthy adults who eat a balanced diet, distilled water for drinking is not a problem. We get the vast majority of our minerals from food, not water. However, for infants, the elderly, or individuals with specific health conditions, relying solely on drinking water low in calcium and other minerals might not be ideal without consulting a health professional.
Scientific Consensus: Major health organizations have not issued warnings against drinking distilled water. The purity of distilled water is completely free of harmful contaminants, which can be a major benefit in areas where the quality of tap water varies or is known to be poor.
Myths Debunked:
- Myth: Distilled water may leach minerals from your body.
- Fact: There is no credible scientific evidence to support this claim. Any water, including tap water, will absorb minerals during digestion, but this effect is negligible and does not deplete your body's mineral reserves.
- Myth: Boiled water is the same as distilled water.
- Fact: Boiling water kills germs, but it does not remove minerals, salts, or heavy metals. In fact, as water boils away, the concentration of these contaminants increases. Does boiling water remove minerals? No, only distillation can do that.

Best Uses for Distilled Water (Drinking, Appliances, More)
Drinking and Cooking: Some people prefer the neutral taste of distilled water. Therefore, this water is used for making crystal-clear ice cubes, coffee, and tea without the mineral taste of tap water.
Home Medical Devices:
- CPAP Machines: Using tap water in a CPAP humidifier can lead to mineral buildup that damages the machine and can be inhaled. Distilled water is essential.
- Neti Pots & Nasal Rinses: Using tap water for nasal rinsing is dangerous, as it can contain harmful microorganisms. Only sterile or distilled water should be used.
- Humidifiers: Prevents the release of white mineral dust into the air and prolongs the life of the appliance.
Other Applications:
- Steam Irons: Prevents mineral deposits from clogging the steam vents.
- Car Batteries & Cooling Systems: Minerals in tap water can interfere with function and cause corrosion.
- Aquariums: Distilled water provides a clean base that allows fish owners to precisely control the mineral and pH levels for sensitive aquatic life.
- Canning & Preserving: Ensures the color and flavor of fruits and vegetables are not affected by minerals.
- Houseplants: Ideal for sensitive plants like orchids and carnivores that can be harmed by the minerals in tap water.

Comparison Table: Which Water to Use?
| Application | Distilled Water | Filtered Water | Tap Water | Reverse Osmosis Water |
| Drinking | Good | Best | Okay* | Good |
| CPAP/Humidifier | Best | Not Recommended | Not Recommended | Good |
| Steam Iron | Best | Not Recommended | Not Recommended | Good |
| Car Battery | Best | No | No | No |
| Aquariums | Best (with re-mineralization) | Okay | Poor | Good |
| Cooking | Good | Good | Okay* | Good |
- Distilled Water is also the best option for appliances like CPAP machines, steam irons, and car batteries, but not ideal for regular drinking or cooking due to its lack of minerals.
- Filtered Water is excellent for drinking and cooking but is not suitable for devices requiring pure water, such as humidifiers or steam irons.
- Tap Water may be fine for general consumption, but can lead to issues with appliances and specific needs like aquariums or CPAP use.
- Reverse Osmosis Water is a good option for most uses, but it may also require re-mineralization for certain applications like aquariums or drinking water.
Distilled Water vs. Other Purification Methods
- Distillation: Boils water and condenses the steam. Use it to make highly purified water, removing nearly everything—minerals, metals, bacteria, and viruses. Naturally distilled water, such as rainwater, follows a similar process in nature, where evaporation and condensation purify water.
- Reverse Osmosis (RO): Pushes water through a semipermeable membrane which allows the water to be extremely clean. Very effective at removing most contaminants, including minerals. Produces wastewater.
- Filtration: Passes water through a physical barrier (like carbon or ceramic). Effectiveness depends on the filter type. Excellent for removing chlorine, sediment, and some chemicals, but may not remove viruses or all dissolved solids.
- Boiling: Heats water is a better choice to kill bacteria, viruses, and protozoa. Does not remove minerals or chemical contaminants.
Pros and Cons of Purification Methods
| Method | Pros | Cons |
| Distillation | Highest purity; removes most contaminants. | Slow; energy-intensive; doesn't remove all VOCs. |
| Reverse Osmosis | Very high purity; removes a wide range of contaminants. | Wastes water; requires installation; removes healthy minerals. |
| Filtration | Fast; affordable; retains healthy minerals; improves taste. | Does not remove all contaminants; filters need regular replacement. |
| Boiling | Kills biological contaminants; simple and effective for emergencies. | Does not remove minerals or chemicals; uses energy. |