1080° Rotating Faucet with Stream and Spray Modes
The Frizzlife MF1080-D360-BN filtered faucet has three independently rotating 360° joints for a combined 1080° range of positioning. Raise, lower, fold, or swing the outlet to direct water around the sink.
Switch between a steady stream for everyday handwashing and filling containers and a broader spray for rinsing and sink cleanup.
Angle Water Down for Easier Pot and Dish Rinsing
Position the articulated faucet outlet closer to large pots, pans, and dishes instead of rinsing from a fixed high arc. Directing the water into the item being washed can help reduce splashes around the kitchen sink.
The adjustable arm stays positioned where you aim it, leaving both hands available for handling cookware and everyday cleanup.
Direct Water for Easier Face Washing and Hair Rinsing
At a compatible bathroom sink, the rotating arm lets you raise and angle the water outlet toward your face rather than relying on a fixed downward stream. This makes face washing, hair rinsing, and everyday handwashing more flexible.
Adjust the outlet to suit the task and direct the flow into the basin to help limit water splashing onto the surrounding counter.
Integrated Carbon Filtration Without a Separate Spout Attachment
MF1080-D360-BN routes water through a carbon-based filter cartridge housed inside the faucet body. You get a built-in filtration setup without adding a separate faucet-mounted filter to the outlet.
Plan to replace the filter cartridge about every three months to maintain routine filtration performance. Actual service life depends on incoming water quality and daily water use.
SUS 304 Stainless Steel with a Brushed Nickel Finish
Built from SUS 304 stainless steel, this filtered bathroom and kitchen faucet is designed for daily sink use. Its brushed nickel finish suits bathroom vanities, kitchen sinks, and compatible bar or prep sinks.
Frizzlife identifies the MF1080-D model as listed by IAPMO R&T to NSF/ANSI/CAN 372-2024 for lead-content compliance under file W-29648.
4-Inch Centerset Faucet with Separate Hot and Cold Handles
MF1080-D360-BN replaces a compatible existing sink faucet with a shared deck plate and two separate handles for hot and cold water control. The installation uses two mounting positions spaced four inches apart.
Quick-connect components simplify assembly. Remove the existing faucet, secure the new unit, and connect the water supply according to the product manual. Standard plumbing tools may still be needed for removal and hookup.
Check Your Sink's Hole Spacing and Deck Thickness
This 4-inch centerset filtered faucet fits compatible two-hole sinks and standard three-hole, 4-inch centerset sinks. For a three-hole sink, the deck plate covers the unused center opening.
Before ordering, verify that the mounting holes are 4 inches apart, each hole measures 0.98–1.5 inches in diameter, and the sink deck is no thicker than 1.06 inches. Check the available clearance for the rotating faucet arm and the water supply connections.
Upgrade Your Sink with MF1080-D360-BN
Get built-in carbon filtration, a flexible 1080° faucet arm, stream and spray water modes, and a brushed nickel finish in one 4-inch centerset faucet. Confirm your sink measurements above before choosing your purchase option.
Back to Purchase Options