Adjust Water Direction with Three Rotating Joints
The Frizzlife MF1080-S-BN features three articulated joints that rotate 360° independently, giving the faucet 1080° of combined joint rotation. Raise, lower, fold, or swing the outlet to bring water closer to the area you need to reach.
Switch between a steady stream for everyday handwashing and filling containers, and a broader spray for rinsing the sink. The two outlet modes work with the adjustable arm, so water direction and spray pattern can be set for different tasks.
Rinse Large Pots and Pans with Less Splash
Angle the MF1080-S-BN swing arm downward so the outlet sits closer to a pot or pan. Directing the water into large cookware helps keep rinsing more controlled and limits splashing around the sink.
Once positioned, the arm lets you guide cookware with both hands instead of holding a pull-down sprayer. Switch to the spray setting when you need broader coverage for dishes or sink cleanup.
Make Face Washing and Hair Rinsing Easier
Bring the adjustable outlet closer to your face instead of leaning far over a fixed bathroom faucet. The three-joint arm lets you change the water direction and position it over the basin for more comfortable washing.
For hair rinsing or quick cleanup, angle the stream where you need it, then fold the arm away when finished. The flexible outlet supports daily bathroom use without changing the whole sink layout.
Filtered Water from One Faucet
The MF1080-S-BN routes water through an integrated carbon-based filter inside the faucet body, so there is no separate filter housing attached to the spout. The cartridge uses filtration media designed to help address particles and everyday taste and odor concerns in tap water.
Plan to replace the cartridge about every three months. Actual filter life depends on incoming water quality and how often the faucet is used. The NSF/ANSI/CAN 372 lead-content listing for the faucet is not a certification of specific contaminant-reduction claims.
SUS 304 Stainless Steel in Brushed Nickel
The MF1080-S-BN uses SUS 304 stainless steel with a brushed nickel finish for everyday bathroom, kitchen and bar or prep sink use. The metal construction and finish are intended for regular handling, repeated arm adjustments and routine sink cleaning.
The MF1080-S model is listed by IAPMO R&T to NSF/ANSI/CAN 372-2024 under file W-29648 for lead-content compliance. That standard addresses the lead content of water-contact materials; it does not certify filter removal rates.
Install with Quick-Connect Components
The MF1080-S-BN is designed for single-hole mounting and includes quick-install components to simplify faucet replacement. Remove the old faucet, secure the Frizzlife faucet in the mounting hole, and connect the hot and cold supply lines according to the installation instructions.
The included supply lines are 27.56 inches long. After installation, check every water connection for leaks. Quick-connect components simplify setup, but plumbing tools or professional assistance may still be needed for your sink and supply valves.
Check Mounting Hole, Deck Thickness and Arm Clearance
The MF1080-S-BN requires a mounting hole approximately 1.26–1.378 inches wide and supports a deck thickness up to 1.77 inches. Its included 27.56-inch hot and cold supply lines have 3/8-inch connections as specified in the dimension guide.
The lower arm joint sits 7.34 inches above the deck. For a raised vessel sink, make sure the rim does not block the arm as it swings or folds. The dimension guide also gives an overall height of about 14.86 inches, so check both height and surrounding clearance before ordering.
Choose the Right MF1080 Style, Finish and Aerator
MF1080-S-BN is the single-hole S-style faucet in brushed nickel with the standard aerator. It is different from the MF1080-S360-BN option, which adds a 360° swivel aerator at the outlet. The three-joint 1080° adjustable arm is a separate feature from that optional aerator.
The MF1080 range also offers D-style integrated-base faucets and X-style three-piece widespread faucets, with brushed nickel (BN) and polished chrome (PC) finishes. Choose the mounting style first, then select the finish and aerator option that matches your sink.
Upgrade to the MF1080-S-BN Faucet
Choose a brushed nickel single-hole faucet with integrated carbon filtration, a 1080° adjustable arm and stream or spray modes. Confirm your mounting-hole dimensions and sink clearance before purchase.
Back to Purchase Options