Free shipping for orders over $25! *No shipment to outlying areas (including Puerto Rico, Guam, Hawaii and Northern Mariana Islands)
1 7

Frizzlife 600 GPD Tankless Reverse Osmosis System – Alkaline, PD600-TAM3

Model: PD600-TAM3
Fast clean alkaline water in a compact design
$469.99

Flexible installment payment options available.

Certification

Report
Testing performed under NSF/ANSI standards 42&53&58. This system has been tested according to NSF/ANSI 42&53&58 for the reduction of substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permittable limit for the water leaving the filter as specified in NSF/ANSI 42&53&58
Worry-Free Warranty
Buy now

Service & Benefits

Fast,Free Shipping For Order Over $25
One-year free warranty(Register to get 150% coverage)
30-Day Return,No Worries guarantee
Lifetime Customer Support
Pay with Ease :
  • PayPal
  • American Express
  • Mastercard
  • Discover
  • Klarna
  • Afterpay

 

water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system

Product Specifications

Model No.PD600-TAM3Filter Cartridge InsideASR211, ASR212, TAM3
Product Dimensions14.7 x 5.3 x 15.5 inchesItem Weight33.06 lb
Working PressureMin.20psi Max.80psiFlow Rate0.41 GPM
Rated Voltage110-240 VACFrequency 50-60 Hz
Rated Power85 WOperating TemperatureMin.39ºF, Max 100ºF

FAQ

Why there are many white bubbles in the water?

Normally for the first time use of the RO system, the water seems to have white bubbles in it,which is normal and totally drinkable. It is because when the pump is pressurizing the water, it will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility further increases. The air can’t be released at that time because of the pressure in the RO system.

However, when you turn on the tap to get a cup of water, the pressure of air is released. So you will see a huge number of bubbles in the water. It looks cloudy and white, but they are just bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally good for drinking.

TDS tester pen shows higher result than the TDS number displayed on the PD600-TAM3?

It is because the TAM3 filter, the post filter, adds the minerals to the water. Normally the TAM3 will increase the TDS by 10-30 ppm. If the system hasn’t been used for a while, the TAM3 will restore more minerals to the water, and at that time the water is very good, the PH level will be more than 9.

Why TDS is higher at the beginning, but back to normal range after about one minute?

Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional RO system or tankless RO system. When the RO system starts to work, pressure from the pump overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes the impurities. When the RO system stops working, the pump stops offering pressure as well. At that time, because of different concentrations, a small fraction of ions will enter into pure water and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the beginning, the quality water is still unbeatable by any other filtration methods including carbon,KDF, ceramic, UF, UV, etc.. The water is totally good to drink and you don’t have to wait for about 1 minute to get the water, since the whole system will not release any harmful substances to the water. The TDS removing rate for PD600-TAM3 is about 94-95%, if your incoming TDS is high, the outlet TDS will be high too.

How does the TDS display on the machine work?

When the system is running, the TDS sensor in the PD600-TAM3 will keep testing the water quality every 1 minute. Therefore, the TDS result you see from the machine is from the last test memory.

If you want to have the real-time TDS result, please let the machine run for about 1 minute.

If I don’t want to use the TAM3, how should I disconnect it?

You don’t have to disconnect the tubing and the fittings on the TAM3. You only need to unscrew the TAM3 filter and the water still can go through.

My granite is thicker than 1.5 inch and the faucet stem is not long enough, what should I do?

Please feel free to contact us at support@frizzlife.com to claim for a longer thread stem.

Installation Video

Reviews

Frizzlife

Frizzlife 600 GPD Tankless Reverse Osmosis System – Alkaline, PD600-TAM3

$469.99

 

water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
water filter system
View product
Copy successfully!