Sistema de filtración de agua por ósmosis inversa Frizzlife RO - Filtro de agua de ósmosis inversa de flujo rápido de 1200 GPD para debajo del fregadero, sin tanque, reduce TDS, compacto, PD1200

Name: Sistema de filtración de agua por ósmosis inversa Frizzlife RO - Filtro de agua de ósmosis inversa de flujo rápido de 1200 GPD para debajo del fregadero, sin tanque, reduce TDS, compacto, PD1200
Brand: Frizzlife
Price: 856.00 USD
Availability: InStock

Modelo: PD1200

Fast pure water in a compact tankless design

$700.00 ~~$856.00~~

$156 off

CODE: PD156

Opciones de pago a plazos flexibles disponibles.

Certificado

Informe

Testing performed under NSF/ANSI standards 42&53&58. This system has been tested according to NSF/ANSI 42&53&58 for the reduction of substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permittable limit for the water leaving the ﬁlter as speciﬁed in NSF/ANSI 42&53&58

Métodos de pago

Envío rápido y gratis en pedidos superiores a 25 $.

Garantía gratuita de 1 año (Regístrate y obtén una cobertura del 150 %)

Devolución en 30 días – compra sin preocupaciones

Soporte al cliente de por vida

Paga con facilidad :

Especificaciones

Modelo

PD1200

Caudal

0.83 GPM

Dimensiones

6.1"L x 15.8"W x 18.3"

GPD

1200

Relación de drenaje

3:1

Tankless

Instalación

No Installation
Drill a hole in the countertop

Requiere electricidad

Remineralización

Detalles de certificación

NSF/ANSI 372
SGS Certified

Método de purificación

0.0001um Reverse Osmosis
Activated Carbon+PP Cotton

Material

BPA-FREE

Filtros de repuesto

Manual de usuario

Manual de usuario

FAQ

Why there are many white bubbles in the water?

Normally for the first time use of the RO system, the water seems to have white bubbles in it, which is normal and totally drinkable. it is because when the pump is pressurizing the water, it will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility further increases. The air can' t be released at that time because ofthe pressure in the RO system. However, when you turn on the tap to get a cup of water, the pressure of air is released. So you will see a huge number of bubbles in the water. it looks cloudy and white, but they are just bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally good for drinking.

Why TDS is higher at the beginning, but back to normal range after about one minute?

Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional RO system or tankless RO system. When the RO system starts to work, pressure from the pump overcomes natural osmotic pressure. forcing feed water through the RO membrane that removes the impurities. When the RO system stops working, the pump stops offering pressure as well. At that time, because of different concentrations, a small fraction of ions will enter into pure water and cause TDS to rise by a small amount.
However, even if the TDS reading is a little high at the beginning, the quality water is still unbeatable by any other filtration methods including carbon, KDF, ceramic, UF UV, etc.. The water is totally good to drink and you don' t have to wait for about 1 minute to get the water, since the whole system will not release any harmfulsubstances to the water. The TDS removing rate for PD1200 is about 94-95%, if your incoming TDS is high, the outlet TDs will be high too.

How does the TDs display on the rachine work?

When the system is running, the TDS sensor in the PD1200 will keep testing the water quality every 30 seconds. Therefore, the TDS result you see from the machine is from the last test memory. If you want to have the real-time TDS result, please let the machine run for about 30 seconds.

Why the system does not work after connecting the power cord?

Maybe you have plugged the power cord into the socket specially designed for garbage diposal, please change another socket.