Frizzlife PD600-TAM3 Reverse Osmosis Under Sink Water Filter System With Alkaline Remineralization

Frizzlife PD600-TAM3 Reverse Osmosis Under Sink Water Filter System With Alkaline Remineralization

$459.85

  • Superior Removing Performance: Uses high-grade reverse osmosis membrane with 0.0001 micron filtration accuracy. Remove 99.99% of 1000+ harmful contaminants, including lead, chlorine, fluoride, heavy metals, chloramine, chemicals, TDS, limescale, arsenic and asbestos and more. Sediment filter is 2-in-1 composite filter that functions as two filters combined. Your drinking water experiences 4 stages of filtration before going to your cup. 
  • Remineralization & Alkalization: TAM3 filter balances the alkalinity of RO water and adjusts the PH to more than 7.5. It also restores health-benefiting essential minerals to your water. 
  • 1.5:1 Low Drain Ratio: Thanks to advanced water-saving technology, the system can save your water up to 450% compared with conventional RO system.
  • No Tank Design: Adopts dopts tankless design. Compact and sleek system with a small footprint takes up less space, saves storage under kitchen sink! No tank also prevents secondary pollution.
  • 600 GPD High Water Flow: Adopts internal prompt and can produce 600 gallons water per day. Water flow is fast and stable, the system can fill a 330ml cup of water in about 10 seconds. 
  • Smart LED Display: The smart display panel clearly tells real-time out TDS and remaining lifespan of each filter. Constantly monitors the water quality 24/7. Acting as a intelligent reminder, the color-coded indicators will always remind you to change filters in advance. .
  • Quick Change: ASR211 and ASR212 filter uses twist-in design, thus makes the filter replacement a breeze and no tools required.
  • Brand: Frizzlife
  • Availability: In Stock
  • SKU: PD600-TAM3

 

Super Low Drain Ratio

Th system maximizes the efficiency and can save your water up to 450% compared with conventional RO filter systems on market.

It makes your water bills more affordable. Over the life of the system, the system pays for itself in water savings!

      • Advanced water-saving technology

Alkaline & Remineralization

TAM filter (3rd stage) balances the alkalinity of RO water and adjusts the PH to

more than 7.5. Drinking weakly alkaline water is beneficial to your health.

Also restores health-benefiting essential minerals to your water.

  • No more acidic water
  • Restore essential minerals
  • Solves the issues of conventional RO systems


Fast Water Flow

The internal pump ensures rapid and stable water flow. It only takes about 10 seconds to fill a 330ml cup of fresh RO water. Satisfy your thirst in a snap.
High capacity can serve daily water needs of large family and small companies.

  • 600 GPD
  • 0.41 GPM

 

 

You Know Your Water

The smart display panel clearly tells real-time out TDS and filter remaining lifespan.

The built-in TDS system constantly monitors the quality of your drinking water 24/7.

The color-coded indicators will always remind you to change filters in advance.

✔Real-time out TDS


✔Filter life monitoring 

 


Quick Replacement 

The first two stages of filter can be replaced only with one single turn after shutting off the power supply.

You don’t even need to shut off the power supply when change the last stage of filter.


Step-to-step instructional manual


Well-organized video

 

 

Q: Why there are many white bubbles in the water?

A: Normally for the first time use of the RO system, the water seems to have white bubbles in it,

which is normal and totally drinkable. It is because when the pump is pressurizing the water, it

will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility

further increases. The air can’t be released at that time because of the pressure in the RO system.

However, when you turn on the tap to get a cup of water, the pressure of air is released. So you

will see a huge number of bubbles in the water. It looks cloudy and white, but they are just

bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally

good for drinking.

 

Q: TDS tester pen shows higher result than the TDS number displayed on the PD600-TAM3?

A: It is because the TAM3 filter, the post filter, adds the minerals to the water. Normally the TAM3

will increase the TDS by 10-30 ppm. If the system hasn’t been used for a while, the TAM3 will

restore more minerals to the water, and at that time the water is very good, the PH level will be

more than 9.

 

Q: Why TDS is higher at the beginning, but back to normal range after about one minute?

A: Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional

RO system or tankless RO system. When the RO system starts to work, pressure from the pump

overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes

the impurities. When the RO system stops working, the pump stops offering pressure as well. At

that time, because of different concentrations, a small fraction of ions will enter into pure water

and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the

beginning, the quality water is still unbeatable by any other filtration methods including carbon,

KDF, ceramic, UF, UV, etc.. The water is totally good to drink and you don’t have to wait for about

1 minute to get the water, since the whole system will not release any harmful substances to the

water. The TDS removing rate for PD600-TAM3 is about 94-95%, if your incoming TDS is high, the outlet

TDS will be high too.

 

Q: How does the TDS display on the machine work?

A: When the system is running, the TDS sensor in the PD600-TAM3 will keep testing the water quality

every 1 minute. Therefore, the TDS result you see from the machine is from the last test memory.

If you want to have the real-time TDS result, please let the machine run for about 1 minute.

 

Q: If I don’t want to use the TAM3, how should I disconnect it?

A: You don’t have to disconnect the tubing and the fittings on the TAM3. You only need to unscrew

the TAM3 filter and the water still can go through.

 

Q: My granite is thicker than 1.5 inch and the faucet stem is not long enough, what should I do?

A: Please feel free to contact us at support@frizzlife.com to claim for a longer thread stem.

 

 

 

 

 

Model No.PD600-TAM3Filter Cartridge InsideASR211, ASR212, TAM3
Product Dimensions14.7 x 5.3 x 15.5 inchesItem Weight33.06 lb
Working PressureMin.20psi Max.80psiFlow Rate0.41 GPM
Rated Voltage110-240 VACFrequency 50-60 Hz
Rated Power85 WOperating TemperatureMin.39ºF, Max 100ºF

Recently Viewed Products

$459.85