Free shipping for orders over $25! *No shipment to outlying areas (including Puerto Rico, Guam, Hawaii and Northern Mariana Islands)

Frizzlife 1080° 4-Inch Centerset Filtered Faucet, Brushed Nickel, MF1080-D-BN

Model: MF1080-D-BN

$99.99

Flexible installment payment options available.

Worry-Free Warranty
Buy now

Service & Benefits

Fast,Free Shipping For Order Over $25
One-year free warranty(Register to get 150% coverage)
30-Day Return,No Worries guarantee
Lifetime Customer Support
Pay with Ease :
  • PayPal
  • American Express
  • Mastercard
  • Discover
  • Klarna
  • Afterpay
Frizzlife MF1080-D-BN brushed nickel faucet with three pivot joints and switchable stream and spray modes
1080° Flexible Rotation & Two Spray Modes

Direct Water Where You Need It with 1080° Positioning

The Frizzlife MF1080-D-BN filtered faucet uses three articulated joints that each rotate 360°, giving you flexible 1080° positioning at the sink. Raise, lower, fold, or swing the outlet to suit everyday washing and rinsing tasks.

Switch between a steady stream for focused water flow and a broader spray for rinsing and cleanup. The brushed nickel faucet combines adjustable reach with two useful outlet modes.

Three independently rotating 360° joints
1080° adjustable faucet positioning
Steady stream for focused washing
Spray mode for broader rinsing
Frizzlife MF1080-D-BN swing arm faucet lowered toward a large pot for kitchen sink rinsing
Flexible Kitchen Sink Rinsing

Lower the Faucet Outlet for Large Pots and Dishes

Position the articulated outlet closer to cookware instead of relying on a fixed, high-arc water stream. The adjustable faucet makes it easier to rinse large pots, dishes, and the sink without holding the outlet in place.

Use the spray setting when you need wider water coverage for dishwashing or sink cleanup, then switch back to stream mode for more focused tasks.

Fold-down outlet for cookware
Adjustable angle for sink rinsing
Hands-free outlet positioning
Stream or spray as needed
Frizzlife MF1080-D-BN adjustable faucet directing water for face washing at a bathroom basin
Everyday Bathroom Convenience

More Comfortable Face Washing and Hair Rinsing

Bring the water stream closer to where you need it by moving the MF1080-D-BN swing-arm outlet forward and adjusting its angle. This makes face washing, handwashing, and hair rinsing more convenient than working around a fixed faucet position.

The adjustable outlet helps keep water directed into the basin for everyday bathroom routines, with stream and spray modes available for different tasks.

Adjust the outlet for face washing
Flexible reach for hair rinsing
Direct water into the basin
Suitable for daily handwashing
Frizzlife MF1080-D-BN built-in carbon water filter media and approximately three-month cartridge replacement interval
Integrated Faucet Water Filtration

Built-In Carbon Filtration Without a Separate Spout Filter

MF1080-D-BN integrates a carbon block filter cartridge into the faucet body, routing water through the cartridge without adding a separate filter attachment to the end of the spout.

The carbon filtration design helps address chlorine-related taste and odor in tap water. Plan to replace the internal cartridge about every three months; actual service life varies with water quality and usage. Filtration performance claims should be checked against product-specific testing.

Carbon block cartridge inside the faucet body
No separate spout-mounted filter
Approximately 3-month replacement interval
Actual filter life depends on water and use
Frizzlife MF1080-D-BN faucet showing brushed nickel finish, SUS 304 stainless steel construction, and lead-content compliance information
Stainless Steel Construction

SUS 304 Stainless Steel with a Brushed Nickel Finish

Made from SUS 304 stainless steel, the MF1080-D-BN is designed for routine use in bathroom, kitchen, and bar or prep sinks. Its brushed nickel finish gives the faucet a coordinated look with similarly finished sink hardware.

The MF1080-D model is listed by IAPMO R&T to NSF/ANSI/CAN 372-2024 for lead-content compliance under file W-29648. This listing addresses material lead content; it is not a certification of contaminant reduction by the filter.

SUS 304 stainless steel body
Brushed nickel finish
IAPMO R&T lead-content compliance listing
For bathroom, kitchen, and prep sinks
Frizzlife MF1080-D-BN two-handle centerset faucet positioned through sink mounting holes with supply-line connections
Centerset Faucet Installation

Install a Two-Handle Faucet with One Shared Deck Plate

MF1080-D-BN uses separate hot and cold handles mounted with the spout on a single deck plate. The two handles let you adjust water flow and temperature directly, while the 4-inch centerset layout is designed to replace a compatible sink faucet.

Remove the existing faucet, secure the new assembly and water connections as directed in the installation instructions, then check the connections for leaks. Confirm the sink layout and plumbing connections before installation.

Separate hot and cold handles
Single shared deck plate
Designed for 4-inch centerset mounting
Check supply connections during installation
MF1080-D-BN faucet dimensions and 4-inch centerset compatibility with two-hole and three-hole sink layouts
Fit & Installation Compatibility

Check Your 4-Inch Centerset Sink Before Ordering

MF1080-D-BN fits compatible two-hole sinks and standard three-hole sinks with 4-inch centerset spacing. For a three-hole installation, the shared deck plate covers the unused center opening.

The supplied fit diagram specifies mounting-hole diameters of 0.98–1.5 inches and a maximum deck thickness of 1.06 inches. Verify these measurements and the available space around your sink before purchase. A drain assembly is not included.

4-inch centerset spacing
Compatible 2-hole or standard 3-hole sinks
Mounting holes: 0.98–1.5 inches
Maximum deck thickness: 1.06 inches

Bring Flexible Filtered Water to Your Sink

Choose the Frizzlife MF1080-D-BN for a brushed nickel, two-handle faucet with built-in carbon filtration, adjustable 1080° positioning, and stream or spray modes. Check sink compatibility and current purchase options above.

Back to Purchase Options

User Manual

FAQ

Will the MF1080-D-BN faucet fit my sink?

The MF1080-D-BN is designed for compatible 2-hole and standard 3-hole sinks with 4-inch centerset spacing. Its deck plate covers the unused center hole on compatible 3-hole sinks. Before purchasing, check your sink's hole spacing, mounting-hole dimensions, and available clearance.

Is the MF1080-D-BN a complete faucet or a faucet attachment?

The MF1080-D-BN is a complete replacement faucet with separate hot and cold water handles, a built-in carbon block filter, and a rotating spout. It is not an attachment for an existing faucet. The package includes a pre-installed filter cartridge, water supply hoses, a deck plate, and mounting hardware.

How often should I replace the MF1080-D-BN filter?

The built-in carbon block filter cartridge should be replaced approximately every 3 months, depending on water quality and usage. To replace it, shut off the water supply, unscrew the knob above the filter housing, remove the old cartridge, and securely install the new one.

Does the MF1080-D-BN faucet rotate 1080 degrees?

Yes. The MF1080-D-BN features three articulated joints that can each rotate 360°, allowing flexible 1080° spout positioning. You can raise, lower, fold, or swing the outlet to make handwashing, face washing, container filling, and sink cleaning easier.

Does the MF1080-D-BN have different water flow modes?

Yes. The faucet offers two water modes: stream and spray. Stream mode provides a steady flow for everyday washing and filling containers, while spray mode provides broader water coverage for rinsing and sink cleanup.

What is the difference between MF1080-D-BN and MF1080-D360-BN?

Both belong to the MF1080-D series and feature a brushed nickel finish, built-in filtration, and a flexible rotating spout. The MF1080-D-BN uses a standard aerator, while the MF1080-D360-BN includes an additional 360° swivel aerator for greater outlet positioning flexibility.

What material is the MF1080-D-BN made from, and is it certified?

The MF1080-D-BN is made from SUS 304 stainless steel with a brushed nickel finish. The MF1080-D model is listed by IAPMO R&T to NSF/ANSI/CAN 372-2024 for lead-content compliance. This certification concerns lead content in the product's materials and does not establish filtration performance for lead or other contaminants.

Installation Video

Reviews

Copy successfully!